Name：Moly-D U-shape Molybdenum Disilicide Mosi2 Heating Elements
View：
Moly-D U-shape Molybdenum Disilicide Mosi2 Heating Elements Description：
Torch furnace mosi2 heating element has been manufacturing Molybdenum disilicide (MoSi2) heating elements since 1978. Specifically made for industrial and laboratory furnaces, the MoSi2 heating elements are a ceramic based resistant element that can produce furnace temperature to 1850C.These custom heating elements are known for their longevity and reliability at a high temperature.The U shaped elements are most frequently used suspended with the bottom of the "U" down. The element consists of two cold ends (Lu) and a U-shaped hot section (Le). The cold ends are twice the diameter of the hot section and are attached by a weld. The extremities of the cold ends are metallized with aluminum to provide a low-resistance contact surface to which the electrical connections are made with flat braided aluminum straps.These elements are available in two grades: MS1700 for element temperatures up to 1700 deg C and MS1800 for element temperatures up to 1850 deg C.
Hot Zone/Cold End Diameter: 3/6, 4/9, 5/10,6/12, 7/14,9/18 or 12/24:
Hot zone length – Le:
Cold end length – Lu (includes taper):
On-center distance between legs:–a
Number of shanks: Two
Operating temperature of furnace: Grade MD-31 or MD-33:
Grade 1800, D1=3mm, D2=6mm, Le=5.5in., Lu=5in., A=.98in.
Specify as: MOSI2, 18-3/6-5.5-5-0.98in
Grade 1700, D1=6mm, D2=12mm, Le=300mm, Lu=250mm, A=50m
Specify as: MOSI2, 17-6/12-300-250-50mm
- W Type Molybdenum disilicide MoSi2 heating elements
- Special shape molybdenum disilicide heating element
- Reference data for the design of Batch-type electri
- Booklet of MoSi2 Heating Element
- Moly-D U-shape Molybdenum Disilicide Mosi2 Heating
- Moly-D Molybdenum Disilicide Mosi2 Heating Element
- L bent MoSi2 heating elements
- Multi-shank molybdenum disilicide heating element